Compact, Upright Design Fits Easily into Tight Spaces
The full-feature HEPA-AIRE PAS1200UV Portable Air Scrubber from Abatement Technologies® is the stainless-steel counterpart to our PRED1200UV model, with similar performance characteristics. The PAS1200UV features variable airflow control from 300 cfm to 900 cfm. Multiple units can be daisy-chained on one 15-amp circuit via the GFCI-protected duplex receptacles. The PAS1200UV is capable of maintaining 6 ACH in spaces up to 7,500-9,000 ft³ at peak-rated airflow.
The PAS1200UV Portable Air Scrubber is designed to employ up to four filter stages to remove potentially hazardous airborne particles from healthcare construction, maintenance, and renovation zones
- First stage pre-filter - Inexpensive 1"-deep pre-filter for larger particles
- Second stage pre-filter - 2"-deep pleated filter for medium-sized particles
- Third stage pre-filter (optional, not included with the unit) - 2"-deep high-capacity carbon filter for gases and odors
- Final stage - Tested & certified 99.97%-efficient metal-frame HEPA filter
UV Lamp: Ultraviolet germicidal irradiation lamp
Features of the HEPA-AIRE PAS1200UV Portable Air Scrubber include
-
Easy to Transport - 8” non-marking rear wheels with smooth tires roll quietly and protect floors
-
Powerful Blower - High-efficiency airfoil blower provides 6 ACH @ 7,500-9,000 ft³
-
Maneuverable in Small Spaces - Front swivel casters allow the PAS1200 to “turn on a dime” in tight spaces
-
Solid-Rivet Aircraft Construction - Strong leak-resistant cabinets
-
User-Friendly Controls - A complete array of convenient controls enables users to continuously monitor the operating status of the PAS1200UV
-
Safety First - NRTL certified to conform to UL507 and CSA 22.2 safety standards
-
Easy 'No Tools' Pre-Filter Access - Fast filter changes
-
Separate Pre-Filter Compartments - Less bypass, helps prevent premature HEPA loading
-
230 VAC/50 Hz Export Model - PAS1200TF runs on 230 Volt/50 Hz current (1,000-1,250 m³/hr.)
Filters Pollutants Using up to Four Stages of Filtration
The PAS1200UV uses a special backward-curved blower and high-speed motor to pull pollutants through up to four stages of filtration.
Recessed Control Panel
The recessed control panel provides all controls in one location.
Control Panel Features:
- Variable speed control
- ‘Power On’ indicator lamp
- ‘Replace Pre-filter’ indicator lamp
- ‘Replace HEPA’ indicator lamp
- Hour meter
- Male power receptacle
- Pop-out circuit breaker
All Abatement HEPA-AIRE® units have been tested by a Nationally Recognized Testing Laboratory (NRTL) and carry the marks certifying that they comply with applicable OSHA, UL and CSA electrical safety standards. Filters meet UL900 flammability standards.
- Features variable airflow control from 300 cfm to 900 cfm
- High-efficiency airfoil blower provides 6 ACH @ 7,500-9,000 ft³
- Front swivel casters allow the PAS1200UV to “turn on a dime” in tight spaces
- Strong leak-resistant cabinets and user-friendly controls
- Ultraviolet germicidal irradiation lamp
| Dimensions (L x W x H) |
19.75 x 22 x 39 |
| Airflow |
900cfm on High, 300cfm on Low |
| Net Weight With Filters |
85 (38.56) |
| Normal Starting Amps |
3.5 |
| Electrical Safety |
120 VAC, 60 Hz, 15 A |
| Cabinet Material |
20 gauge stainless steel |
| Pre Filter Access |
Hinged “no tools” access door |
| Stage 2 Pre_Filter |
#H502, 2” deep pleated particulate |
| Stage 1 pre-filter |
#F621, 1” deep coarse particulate |
| Stage 3 optional pre-filter |
#VL1002, 2” deep high capacity carbon |
| HEPA Filter |
#H610C-99 |
| Motorized Impeller |
400 watt, auto reset, 60 Hz, single phase |