Key Features
How The CASTAIR 80-Gallon Compressor Compares To Other Industrial Compressor Options
Fabrication shops and industrial facilities evaluating stationary air compressors usually face this question: should I get a basic single-stage compressor, a standard two-stage Baldor-motor unit, or invest in the CASTAIR Industrial Series with reinforced internal components?
| Feature | Basic Single-Stage Compressor | Standard Two-Stage Baldor Compressor | CASTAIR Industrial Series |
|---|---|---|---|
| Pump Type | Single-stage | Two-stage cast iron | Two-stage cast iron, runs at a low 895 RPM |
| Air Output | 12-15 CFM at 90 PSI | 16.2-22.1 CFM at 175 PSI | 32.4 CFM at 0 PSI, 24.8 CFM at 100 PSI |
| Crankshaft Bearings | Standard bushings | Standard bearings | Tapered roller bearings at both ends |
| Startup Components | Basic switch | Pre-wired magnetic starter | Quality pressure switch and magnetic starter, factory wired |
Product Description
How The CASTAIR 80-Gallon Compressor Compares To Other Industrial Compressor Options
Fabrication shops and industrial facilities evaluating stationary air compressors usually face this question: should I get a basic single-stage compressor, a standard two-stage Baldor-motor unit, or invest in the CASTAIR Industrial Series with reinforced internal components?
Here's the honest comparison:
| Feature | Basic Single-Stage Compressor ($1,500-$2,200) | Standard Two-Stage Baldor Compressor ($2,400-$3,800) | CASTAIR Industrial Series ($4,599.99) |
|---|---|---|---|
| Pump Type | Single-stage | Two-stage cast iron | Two-stage cast iron, runs at a low 895 RPM |
| Motor | Standard motor | Baldor 7.5 HP, 1725 RPM | Made in USA Baldor motor, 1725 RPM, full 15% service factor |
| Air Output | 12-15 CFM at 90 PSI | 16.2-22.1 CFM at 175 PSI | 32.4 CFM at 0 PSI, 24.8 CFM at 100 PSI |
| Crankshaft Bearings | Standard bushings | Standard bearings | Tapered roller bearings at both ends for superior support and less friction |
| Connecting Rods | Standard | Standard | Precision steel rods with automotive-type rod insert bearings at crankshaft and wrist pin |
| Startup | Direct load startup | Standard startup | Centrifugal unloader for loadless startup every operation |
| Discharge Tube | Standard rubber | Standard | Copper or stainless braided discharge tube for strength and increased heat dissipation |
| Tank Compliance | Basic or non-compliant | ASME certified | ASME-compliant powder coated tank with ASME safety valves |
| Startup Components | Basic switch | Pre-wired magnetic starter | Quality pressure switch and magnetic starter mounted and wired from factory |
Why The CASTAIR 80-Gallon Compressor Is Worth The Investment
This isn't just a stationary air compressor, it's an industrial-grade machine built with reinforced internal components designed to outlast standard two-stage compressors under continuous shop use.
The CASTAIR specifically addresses the needs of fabrication shops and industrial facilities that run air tools continuously and need a compressor that won't become the weak link in daily operations.
Quieter Operation, Longer Service Life. The two-stage cast iron pump runs at a low 895 RPM, which reduces noise on the shop floor while extending pump life well beyond typical oil-less or higher-RPM two-stage compressors.
Engineered With Precision Internal Components
Tapered roller bearings at both ends of the crankshaft provide superior support and reduce friction over the life of the pump
Precision steel connecting rods with automotive-type rod insert bearings at the crankshaft and bearings at the wrist pin add long-term reliability
Disc and spring valves simplify service while maintaining efficiency and maximum reliability
Built For Reliable Daily Startup And Cooling
The centrifugal unloader provides loadless startup on every operation, reducing strain on the motor and pump
The copper or stainless braided discharge tube adds strength while increasing heat dissipation
The rigid metal belt guard keeps the belt totally enclosed during operation for both safety and performance
Real Savings
The oil-lubricated cast iron pump reduces the frequent replacement costs associated with lower-quality compressor pumps
Tapered roller bearings and reinforced connecting rods reduce the risk of costly pump failure under continuous shop use
The pre-wired magnetic starter and pressure switch save on installation time and electrician costs
Free shipping and no sales tax through Summit Forge Supply keeps the total cost down compared to buying elsewhere and paying tax and freight separately
The Bottom Line Fabrication shops and industrial facilities that run air tools continuously can't afford a compressor that overheats, wears out early, or can't keep up with demand. The CASTAIR Industrial Series is built with a low-RPM cast iron pump, precision internal components, and a USA-made Baldor motor, so it delivers reliable air supply shift after shift. For anyone running a serious shop floor operation, this is the compressor built to keep the air flowing.
- 895 RPM, oil-lubed cast iron pump for quiet operation and long service life
- 32.4 CFM at 0 PSI, 24.8 CFM at 100 PSI
- Tapered roller bearings at both ends of crankshaft for superior support & less friction
- Precision steel connecting rods with automotive type rod insert bearings at crankshaft, and bearings at wrist pin for long service life and reliability
- Disc and spring valves for ease of service, efficiency, and maximum reliability
- Centrifugal unloader for loadless startup every operation
- Automotive filters with paper element provide clean intake air and quiet operation
- Easy to read sight glass to ensure proper oil level at a glance
- 80 gallon ASME-compliant powder coated tank with ASME safety valves
- Rigid metal guard keeps belt totally enclosed during operation
- Copper or stainless braided discharge tube for strength and increased heat dissipation
- Heavy duty made in USA Baldor motor runs at 1725 RPM with full 15% service factor
- Quality pressure switch and magnetic starter mounted and wired from factory
- 50A breaker required for operation
Full Spec Sheet
| Model | GPE211019 |
| Pump | Two-stage, 895 RPM, oil-lubed cast iron |
| Air Output | 32.4 CFM at 0 PSI, 24.8 CFM at 100 PSI |
| Motor | 7.5 HP, Baldor, made in USA, 1725 RPM, 15% service factor |
| Tank | 80 gal, ASME-compliant, four legs, made in USA |
| Breaker Required | 50A |
| Discharge Tube | Copper or stainless braided |
Free shipping on every U.S. order
Genuine products from trusted manufacturers
Real help before and after your purchase
Protected payments and encrypted checkout